|
|
|
| |
|
|
|
|
|
#
LD-28TS
Mini
Type |
#
LD-28TW
Standard
Type |
#
LD-28
Patented
Ring Type |
|
| |
|
Application Introduction:
- User can stick
any side on the demonstration table and stick the other side on
the display object.(Twin-End Type)
- Fix the coiled
cord onto an uneasily released bar or the demonstration table then
stick the adhesive pad on the object you want to protect or tie
it with the ring at theend of the coiled cord and stick the alert
on the table.(Ring-End Type)
- Push down the
white bar to Arm it.
- The alarm will
be activated immediately when any one pries up any side of them
or cut the wire between them.
|
|
| |
|
Key features:
- No external
power or other control center required.
- Lithium battery
CR1220 installed able to keep stand-by for over 3 years.
- One side with
an alarm and tamper switch ; the other side with tamper switch only.
(Twin-End type)
- Adhesive pad
replaceable ; the renewal cost will be very low when you use it.
- For protecting
cellular phone,PDA,camera,notebook and other expensive merchandises
during demonstration.
|
Specifications:
- Operating voltage
: 2V-3V DC
- Stand-by current
consumption : 0.6uA ( Typical )
- Activation
current consumption : 13mA ( Typical )
- Lithium battery
CR1220 capacity : 36 mAh
- Stand-by battery
life : Over 3 years
- Continuous
activation battery life : Over 1 hour
- Storage battery
life : Over 10 years
- Material of
housing :ABS
- Material of
coiled cord : PU
- Length of cord
: 50 +/- 3 cm ( Relax ),120 +/- 10 cm ( Actual )
- Buzzer output
: 88 +/- 3 dB ( at 1 ft.)
- Buzzer tone
( 2048 Hz ) : Continuous Bi --
- Size(mm) :
LD-28,
LD-28TW : 39(L)x15(W)x11(H),
LD-28TS : 27(L)x18(W)x12(H).
- Packing : 20
pcs / tray ; 400 pcs / ctn,
N.W./G.W./Mest : 6.1 Kgs/7.1 Kgs/1.1
|
| |
|
| |
|
SHOCK-ALERT
STICK-ON
WINDOW / GLASS SHOCK ALARM
CRIME BUSTER FOR HOME SECURITY |
| |
|
|
|
|
#
LD-26B |
Warning
Lable |
|
| |
Key features:
- Stick-on any
smooth window or glass surface.
- With Lithium
battery CR 2032 installed can keep armed for 10 years.
- To arm this
alarm by pulling out the pin totally or just halfway,for ease to
dearm this alarm where the window or glass is neccessary to open
very often.
- Spring type
sensor with no error trigger.This alarm will only be activated by
the vibration caused from the window hervily punched but won't be
activated due to the wind blow or violent sound pressure.
- DIY installation,Keep
your home and store safe.
|
|
| |
Specifications:
- Operating voltage
: 2V - 3V DC
- Stand-by current
consumption : 0.5 uA
- Activation
current consumption : 30 mA
- Lithium battery
CR2032 capacity : 210 mAh
- Stand-by battery
life : Over 10 years
- Continuous
activation battery life : Over 7 hours
- Siren output
: 105 +/- 5 dB ( at 1 ft.)
- Material of
housing : ABS
- Color : Ivory,or
others if required.
- Packing : 1
pc/blister ; 12 pcs/inner ctn ; 144 pcs/ctn ;
N.W./G.W./Mest : 8.5 Kgs/10.0 Kgs/2.5
|
|
| |
|
|
|
 |
|
|
